DITL_400.txt
Items: (8 entries)
  0:
    Bounds: x1=0, y1=0, x2=425, y2=212
    Type: 64
    Info: '6'
  1:
    Bounds: x1=0, y1=0, x2=424, y2=212
    Type: 64
    Info: '5'
  2:
    Bounds: x1=4, y1=128, x2=420, y2=246
    Type: -112
    Info: '                         Updating Application Preferences'
  3:
    Bounds: x1=10, y1=184, x2=403, y2=199
    Type: -120
    Info: 'Application Code ÔMSWDÕ'
  4:
    Bounds: x1=368, y1=218, x2=400, y2=238
    Type: -120
    Info: '100'
  5:
    Bounds: x1=11, y1=212, x2=360, y2=240
    Type: 16
    Info: ''
  6:
    Bounds: x1=12, y1=212, x2=168, y2=240
    Type: 64
    Info: ''
  7:
    Bounds: x1=400, y1=218, x2=416, y2=238
    Type: -120
    Info: '%'

DITL_248.txt
Items: (2 entries)
  0:
    Bounds: x1=294, y1=74, x2=362, y2=94
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=73, y1=7, x2=361, y2=64
    Type: -120
    Info: 'Due to an internal problem the Installer is unable to proceed. Restart the computer while pressing the shift key and try again.'

DITL_247.txt
Items: (2 entries)
  0:
    Bounds: x1=294, y1=74, x2=362, y2=94
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=73, y1=7, x2=361, y2=64
    Type: -120
    Info: 'Due to a limitation of this installer, the selected packages may only be installed on the active startup disk.'

DITL_246.txt
Items: (2 entries)
  0:
    Bounds: x1=297, y1=74, x2=361, y2=94
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=73, y1=7, x2=365, y2=59
    Type: -120
    Info: 'The provided Serial ID has expired. You may contact Jump Developement Group by calling 412-681-2692.'

DITL_245.txt
Items: (4 entries)
  0:
    Bounds: x1=296, y1=74, x2=362, y2=94
    Type: 4
    Info: 'Update'
  1:
    Bounds: x1=214, y1=74, x2=286, y2=94
    Type: 4
    Info: 'Replace'
  2:
    Bounds: x1=73, y1=74, x2=184, y2=94
    Type: 4
    Info: 'Cancel Install'
  3:
    Bounds: x1=73, y1=7, x2=360, y2=70
    Type: -120
    Info: 'Would you like to update your existing OptiMization settings or simply replace them with the distributed settings?'

DITL_244.txt
Items: (4 entries)
  0:
    Bounds: x1=278, y1=84, x2=362, y2=104
    Type: 4
    Info: 'Retain New'
  1:
    Bounds: x1=192, y1=84, x2=268, y2=104
    Type: 4
    Info: 'Install Old'
  2:
    Bounds: x1=73, y1=84, x2=172, y2=104
    Type: 4
    Info: 'Cancel Install'
  3:
    Bounds: x1=73, y1=7, x2=369, y2=72
    Type: -120
    Info: 'Your existing OptiMization parameters for Ò^0Ó are newer than the ones being installed.Keep your newer settings?'

DITL_243.txt
Items: (4 entries)
  0:
    Bounds: x1=278, y1=74, x2=362, y2=94
    Type: 4
    Info: 'Install New'
  1:
    Bounds: x1=192, y1=74, x2=268, y2=94
    Type: 4
    Info: 'Retain Old'
  2:
    Bounds: x1=73, y1=74, x2=174, y2=94
    Type: 4
    Info: 'Cancel Install'
  3:
    Bounds: x1=73, y1=7, x2=364, y2=70
    Type: -120
    Info: 'Install the new OptiMization parameters for Ò^0Ó?(Your previous settings will be replaced.)'

DITL_242.txt
Items: (2 entries)
  0:
    Bounds: x1=294, y1=74, x2=362, y2=94
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=73, y1=7, x2=343, y2=69
    Type: -120
    Info: 'Unable to restore your previous OptiMization parameters.'

DITL_241.txt
Items: (3 entries)
  0:
    Bounds: x1=217, y1=100, x2=362, y2=120
    Type: 4
    Info: 'Install New Settings'
  1:
    Bounds: x1=73, y1=100, x2=207, y2=120
    Type: 4
    Info: 'Undo Last Settings'
  2:
    Bounds: x1=73, y1=7, x2=359, y2=87
    Type: -120
    Info: 'Instead of installing new OptiMization settings, you may choose to undo your last installation of them.(If you choose to undo, any changes made since the last installation will be lost.)'

DITL_240.txt
Items: (3 entries)
  0:
    Bounds: x1=130, y1=84, x2=196, y2=104
    Type: 4
    Info: 'Cancel'
  1:
    Bounds: x1=206, y1=84, x2=362, y2=104
    Type: 4
    Info: 'Continue Installation'
  2:
    Bounds: x1=73, y1=7, x2=363, y2=80
    Type: -120
    Info: 'Unable to ^0. You may continue, but after installing you will not be able to revert to your previous preferences.'

DITL_239.txt
Items: (2 entries)
  0:
    Bounds: x1=294, y1=74, x2=362, y2=94
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=73, y1=7, x2=357, y2=70
    Type: -120
    Info: 'Unable to finish writing the Size Prefs file on the startup disk! Installation cannot be completed. (Startup disk may be too full.)'

DITL_238.txt
Items: (2 entries)
  0:
    Bounds: x1=294, y1=74, x2=362, y2=94
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=73, y1=7, x2=363, y2=56
    Type: -120
    Info: 'Unable to merge OptiMization parameters. (No Preferences folder, or new Size Prefs was not copied correctly.)'

DITL_237.txt
Items: (2 entries)
  0:
    Bounds: x1=294, y1=74, x2=362, y2=94
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=73, y1=7, x2=362, y2=63
    Type: -120
    Info: 'Unable to finish writing the OptiMem file on the startup disk! Installation cannot be completed. (Startup disk may be too full.)'

DITL_236.txt
Items: (2 entries)
  0:
    Bounds: x1=294, y1=74, x2=362, y2=94
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=73, y1=7, x2=365, y2=69
    Type: -120
    Info: 'Unable to configure ÒOptiMem InstallationÓ disk. The floppy disk must be unlocked to complete the installation correctly. (Eject the disk and slide the lock tab.)'

DITL_235.txt
Items: (2 entries)
  0:
    Bounds: x1=294, y1=74, x2=362, y2=94
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=73, y1=7, x2=359, y2=71
    Type: -120
    Info: 'Unable to access the OptiMem file on the startup disk! Installation cannot be completed.'

DITL_234.txt
Items: (2 entries)
  0:
    Bounds: x1=294, y1=74, x2=362, y2=94
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=73, y1=7, x2=370, y2=71
    Type: -120
    Info: 'Failed to access the ÒOptiMem InstallationÓ disk. The disk name and its file names must be unchanged to complete the installation correctly. (Use original disk.)'

DITL_233.txt
Items: (2 entries)
  0:
    Bounds: x1=294, y1=74, x2=362, y2=94
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=73, y1=7, x2=359, y2=54
    Type: -120
    Info: 'Not enough memory is available to complete the installation of OptiMem.'

DITL_232.txt
Items: (2 entries)
  0:
    Bounds: x1=294, y1=74, x2=362, y2=94
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=73, y1=7, x2=361, y2=64
    Type: -120
    Info: 'The volume selected for installation must be a valid startup disk (containing the system software files).'

DITL_231.txt
Items: (2 entries)
  0:
    Bounds: x1=297, y1=138, x2=361, y2=158
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=73, y1=7, x2=360, y2=124
    Type: -120
    Info: 'The Serial ID is printed on your proof of purchase or ÒRead Me FirstÓ card. Please store it in a safe place after detaching and mailing the registration card.If you do not have a valid Serial ID you may still install the one-day-demo.'

DITL_230.txt
Items: (2 entries)
  0:
    Bounds: x1=294, y1=74, x2=362, y2=94
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=73, y1=7, x2=359, y2=59
    Type: -120
    Info: 'Please enter your organization (or other affiliation, such as ÒHomeÓ) in order to personalize the installation.'

DITL_229.txt
Items: (2 entries)
  0:
    Bounds: x1=294, y1=74, x2=362, y2=94
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=73, y1=7, x2=357, y2=45
    Type: -120
    Info: 'Please enter your name in order to personalize the installation.'

DITL_228.txt
Items: (10 entries)
  0:
    Bounds: x1=322, y1=166, x2=390, y2=186
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=238, y1=166, x2=312, y2=186
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=118, y1=58, x2=376, y2=74
    Type: 16
    Info: ''
  3:
    Bounds: x1=118, y1=90, x2=376, y2=106
    Type: 16
    Info: ''
  4:
    Bounds: x1=118, y1=122, x2=376, y2=138
    Type: 16
    Info: ''
  5:
    Bounds: x1=73, y1=7, x2=387, y2=42
    Type: -120
    Info: 'Please personalize your copy of OptiMem with the following information:'
  6:
    Bounds: x1=19, y1=58, x2=112, y2=142
    Type: -120
    Info: '            Name:Organization:       Serial ID:'
  7:
    Bounds: x1=318, y1=162, x2=394, y2=190
    Type: 64
    Info: ' €'
  8:
    Bounds: x1=20, y1=10, x2=52, y2=42
    Type: -96
    Info: 'ì'
  9:
    Bounds: x1=20, y1=166, x2=212, y2=186
    Type: 4
    Info: 'No Serial ID - Install Demo'